Skip to main content

Adrian Magni - Designer and Developer

Search This Blog

Blog Begins

on March 26, 2006

Get link
Facebook
X
Pinterest
Email
Other Apps

I have started this blog to publish my works online.
By posting this photo I can use it in my profile on the sidebar over there -->
The banner image can go on the top of my blog.

Get link
Facebook
X
Pinterest
Email
Other Apps

Comments

Popular Posts

Compiling and Flashing Artemis Watch Firmware

I ordered this Artemis smartwatch kit on Indiegogo, and was pretty impressed with the pre-installed themes but I wanted to try adding my own. I found that the only way to do this was to edit and re-compile the whole ESP32 firmware, which took quite a few attempts before I worked out all the dependencies. Here are some instructions for anyone who'd like to try it on their own watch. Download and Install ESP-IDF 5.1.6 The Espressif compiler takes all the individual files and packs them into a binary file that can be flashed to the Artemis Watch. When I tried the latest version of the compiler, it didn't work with the Artemis source. The Artemis GitHub page specifies version 5.1, so I downloaded the 5.1.6 installer from https://dl.espressif.com/dl/esp-idf/?idf=4.4 After installing, you can open ESP-IDF in a command prompt window: It might look a bit daunting, but you only need two commands most of the time. To compile a project, go to the project folder and type id...

FX Audio D802C - Unboxing and Setup

I've been using a cheap amplifier from Jaycar on my work PC for about 10 years now, and while it worked it's never sounded that great and has a fair bit of background hum. Looking online for a replacement, I spotted the D802C on AliExpress: http://www.aliexpress.com/item/FEIXIANG-FX-AUDIO-pure-digital-amplifier-D802C-remote-USB-optical-coaxial-Bluetooth-AUX-input-80W-2/32428321269.html Not just an amplifier, it's also a USB DAC and a Bluetooth receiver, so it should be able to talk to anything I get in the foreseeable future. I took the plunge and ordered one. A couple of weeks later the postman brought this plain-looking box to the door: I couldn't find much English-language info about this device online, so I thought I'd do a quick write-up on setting it up. Inside, you get a USB A-to-B cable: a tiny remote control (with no battery so I haven't tried using it yet): and this fairly large power brick: 5 amps at 32 volts should ma...

Replacing Daelim S1 Regulator Rectifier

A few weeks ago, the battery in my scooter went flat for the second time in six months. I was able to recharge it with a plug-in charger, so I figured there had to be something preventing the battery from charging. Some research on the Scooter Community forums indicated that the regulator rectifier often fails on this model, leading to progressive loss of charging as well as unreliable starting. Daelim S1 Charging System The Daelim service manual shows how to remove and test the regulator, so I pulled it out and found that the resistances were all wrong. Voltage was leaking through and discharging the battery, so I ordered a new regulator from the dealer. Standard regulator (left) and upgraded one (right) The new regulator is much bigger than the old one, with a heavier heatsink. This should make the new one less likely to overheat. Standard bolt (left) and new one (right) To fit the bigger heatsink, the standard bolts need to be repla...

Powered by Blogger